The next switch labs will cover multiple switches in a switching fabric. To prepare for these labs, another switch is required. Configure a new switch:
hostname labsw2
interface VLAN 1 - IP address 192.168.1.76 255.255.255.0
All other parts of the configuration should be the same as labsw1:
All passwords: enable secret, console, vty
Password encryption
DNS server
VLANs
200 - interfaces Fa0/1, Fa0/2
201 - interfaces Fa0/3, Fa0/4
202 - interfaces Fa0/5, Fa0/6
203 - interfaces Fa0/7, Fa0/8
When you have finished the configuration, save to the startup config and the TFTP server. Test all configurations as was done in Labs 1-9.
Actually, this is partially a test. You should be able to do most of these things from memory. If you can't, review the previous labs closely.
Good luck. The next labs will connect multiple switches and begin discussing the switch fabric.
